A motor vehicle service or tune-up is a series of maintenance procedures carried out at a set time interval or after the vehicle has travelled a certain distance. The service intervals are specified by the vehicle manufacturer in a service schedule and some modern cars display the due date for the next service electronically on the instrument panel.
A complete service history usually adds to the resale value of a vehicle.



Hub and its bearing are an integral part of steering. To get to the hub, you must dismount the wheel and near brake system: first take off the rim, brake caliper, brake pads and brake disc. Then simply take off the hub and bearing inside.



ABS module is a new thing in the list of parts that can be changed. The part that helps in the braking process will be a regular visitor in the orders, so you should know its localization, especially since it has been well hidden. Despite appearances you won't find it near the brake servo but close to the engine, near the fuel filter. After locating it, all that is left is to unscrew it and replace with a new one.



Crankshaft is located in the center of the engine block - it means that it is time consuming and requiring to get to it. You must take out few parts that consist of more than dozen of parts. First you should disassemble the engine from the basis to the end - so you take out ignition elements, the head, camshafts and pistons and rods while at the same time you dismount the timing, beginning with water pump and on timing belt finishing. Then take of the oil sump or oil filter - then you must place the car on a jack. Next remove the gearbox - including not only all its elements, but nearby tie rods or steering gear, which is followed with taking the wheels off. Final step is removing all crankshaft bearings holders that keeps that construction in one place.



Both coils and ignition candles can be found near the engine. In case of R4 engines coils are placed on the head plate and under it ignition candles are mounted. It change in case of diesel engines - in case of other constructions you won't find any coils, only ignition candles - they are located near the exhaust manifold, under the ignition wires.

Job	Average Prices*
Brakes	$50 / Wheel
Tune ups	$45
Wheel bearings	$100
Ball joints	$30
Tie rods	$30
Stabilizer Links	$30

• Change the engine oil
• Replace the oil filter
• Replace the air filter
• Replace the fuel filter
• Replace the cabin filter
• Replace the spark plugs
• Tune the engine
• Check level and refill brake fluid/clutch fluid
• Check Brake Pads/Liners, Brake Discs/Drums, and replace if worn out.
• Check level and refill power steering fluid
• Check level and refill Automatic/Manual Transmission Fluid
• Grease and lubricate components
• Inspect and replace the timing belt or timing chain if needed
• Check condition of the tires
• Check for proper operation of all lights, wipers etc.
• Check for any Error codes in the ECU and take corrective action.
• Use scan tool read trouble code.

Maintenance requirements are spelled out in the owners manual, service manual, or available upon request.